不锈钢反应釜的工作原理就是两种或两种以上介质在一定的温度下伴随搅拌进行某种反应，如不锈钢反应釜内部物料的温度控制不好，会大幅度降低生产率甚至报废整个釜内物料，那么如何检测不锈钢反应釜内物料温度并且对其加以控制呢？
检测方法：可以用PT100温度计，用密封的不锈钢管子插入斧内，管子里加进去一些导热油，把温度计塞到导热油以下就可以，不会有太大的误差的。
温度过高的控制
1、停止加热：通过电器控制箱上的温度显示仪表及报警器可方便、快捷地判断出不锈钢反应釜内部物料的温度情况，当温度过高时，电器控制器按设定的程序自动地停止某组电加热器的工作，将温度保持在恒定的范围内。
2、启动釜内的冷却盘管：釜内的冷却盘管一般作为冷却用，如当检测到不锈钢反应釜内部物料的温度可能很高时，及时启用内部冷却盘管，并加大冷却水的流量，及时有效地降低不锈钢反应釜内部物料的温度。
3、持续搅拌。
温度过低时的控制
启动剩余加热器：通常情况下，在不锈钢反应的设计与制作中会为用户考虑到，生产过程会更换不同的物料，不同物料的理化特性不同，加热效果也不同，因此会相应适当增加加热器的功率，根据不同的物料进行选择，当温度过度低时，启用剩余加热器便可。
The working principle of stainless steel reactor is two or more than two kinds of medium at a certain temperature with stirring for a reaction, such as stainless steel reactor internal material temperature control is not good, will greatly reduce the productivity and scrap materials the kettle, so how to detect the temperature of materials of stainless steel reactor and to control them.?
Test method: you can use the PT100 thermometer, stainless steel pipe sealing insert axe, the add in some oil, put the thermometer into the heat conduction oil below it, won't have too big error.
Control the temperature too high
1、Stop heating: according to the electrical control box on the temperature display instrument and alarm can be convenient, quick to judge the temperature stainless steel reactor internal material, when the temperature is too high, electric controller programmed automatically stop a group of electric heater, the temperature is maintained at a constant range.
2、Start the cooling coil in the cauldron: cooling coil reactor is generally used as cooling, such as when the stainless steel reactor internal temperature of the material may be high, to enable the internal cooling coil, and to increase the flow of cooling water, timely and effectively reduce the stainless steel reactor internal temperature of the material.
3、Continuous mixing
Control when the temperature is too low.
Start the remaining heater: under normal circumstances, in the design and manufacture of stainless steel reaction will be considered for the user to be replaced, the production process of different materials, different materials have different physical and chemical properties, the heating effect is different, so will be appropriate to increase the power of the heater, according to different material choice, when the temperature is too low when enabled, the remaining heater can.
